Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_STABLE (LUUNA) #5: Tue Jan 25 22:16:35 CET 2011
	root@netbsd.tumfatig.local:/usr/src/sys/arch/amd64/compile/LUUNA
total memory = 1024 MB
avail memory = 974 MB
timecounter: Timecounters tick every 10.000 msec
SMBIOS rev. 2.5 @ 0xdc010 (43 entries)
mainbus0 (root)
mainbus0: scanning 0x9dc00 to 0x9dff0 for MP signature
mainbus0: scanning 0x9d800 to 0x9dbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf7bf0
mainbus0: MP config table at 0x9e071, 328 bytes long
cpu0 at mainbus0 apid 0
cpu1 at mainbus0 apid 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, virtual wire mode, version 20, 24 pins
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 1662MHz, id 0x106ca
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
acpi0 at hypervisor0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , CL09   ,06040000>, AslId < LTP,00000000>
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 5 at level 2
mpacpi: found subordinate bus 7 at level 2
mpacpi: failed to derive bus number, ignoring
mpacpi: found subordinate bus 11 at level 2
mpacpi: found subordinate bus 17 at level 2
mpacpi: 5 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (1/1)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 7 int routing
mpacpi: configuring PCI bus 11 int routing
mpacpi: configuring PCI bus 17 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 19 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 27 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci5 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci5 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci5 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci5 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci7 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci11 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci11 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci11 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci11 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci17 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci17 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci17 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci17 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci17 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 189a0<vector=a0,delmode=1,logical,level,masked,dest=0> 3000000<target=3>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
EMSC (CPL0002) at acpi0 not configured
pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
TIMR (PNP0100) [AT Timer] at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: SDI, Lion, DELL 2T6K2025 11
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, DLL041A) (aux port): irq 12
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
ioapic0: int1 928<vector=28,delmode=1,logical,dest=0> 3000000<target=3>
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
ioapic0: int12 978<vector=78,delmode=1,logical,dest=0> 3000000<target=3>
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0xa010 (rev. 0x00)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0xa011 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0xa012 (miscellaneous display) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
ioapic0: int22 1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> 3000000<target=3>
azalia0: interrupting at ioapic0 pin 22, event channel 5
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 5
ppb0: added to list as bus 5
pci1: i/o space, memory space enabled
re0 at pci1 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
ioapic0: int16 1a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0> 3000000<target=3>
re0: interrupting at ioapic0 pin 16, event channel 6
re0: Ethernet address 00:26:b9:a5:37:2b
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 7
ppb1: added to list as bus 7
pci2: i/o space, memory space enabled
vendor 0x14e4 product 0x4315 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci3 at ppb2 bus 11
ppb2: added to list as bus 11
pci3: i/o space, memory space enabled
vendor 0x14e4 product 0x1615 (miscellaneous multimedia) at pci3 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
ioapic0: int23 1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> 3000000<target=3>
uhci0: interrupting at ioapic0 pin 23, event channel 7
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
ioapic0: int19 1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> 3000000<target=3>
uhci1: interrupting at ioapic0 pin 19, event channel 8
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
ioapic0: int18 1a9c8<vector=c8,delmode=1,logical,actlo,level,masked,dest=0> 3000000<target=3>
uhci2: interrupting at ioapic0 pin 18, event channel 9
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16, event channel 6
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23, event channel 7
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci4 at ppb3 bus 17
ppb3: added to list as bus 17
pci4: i/o space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x27bc (rev. 0x02)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1
ahcisata0: interrupting at ioapic0 pin 19, event channel 8
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc720e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19, event channel 8
iic0 at ichsmb0: I2C bus
dbcool_chip_ident: addr 0x2c c_id 0x00 d_id 0x00 r_id 0x00: No match.
dbcool_chip_ident: addr 0x2d c_id 0x00 d_id 0x00 r_id 0x00: No match.
dbcool_chip_ident: addr 0x2e c_id 0x00 d_id 0x00 r_id 0x00: No match.
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 2048MB, 667MHz (PC2-5300)
spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 3.00ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 10
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
xenbus0: using event channel 11
azalia0: codec[0]: 0x10ec/0x0272 (rev. 0.1), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: PHY offline
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
wd0 at atabus0 drive 0: <WDC WD1600BEVS-22RST0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ugen0 at uhub4 port 4
ugen0: SuYin Laptop_Integrated_Webcam_1.3M, rev 2.00/9a.14, addr 2
ugen1 at uhub4 port 5
ugen1: Hauppauge Computer Works Dell Digital TV Receiver, rev 2.00/0.01, addr 3
umass0 at uhub4 port 8 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/58.88, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
sd0(umass0:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd0: unable to open device, error = 19
Kernelized RAIDframe activated
sd0(umass0:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
tap0: Ethernet address f2:0b:a4:c5:86:00
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)